|
Many cities, counties, schools, and property managers are looking for
ways to eliminate the damage to property that is caused by skaters.
|
|
are specially-designed nylon or aluminum products that may be applied to :
|
|
|
|
 |
- Planters
- Benches
- Retaining
Walls
- Handrails
- Curbs
- Flat Surfaces
|
|
"Curve
caps" installed on planter and problem is gone. |
The compact, low-profile design allows you to deter skaters without
adversely affecting the appearance or functionality of the treated surface.
Aluminum pieces are made from construction grade, non-rusting
aluminum and provide superior durability and longevity. The
architectural series (AS) enhances the look of your property--for those
applications in which design is as important as function.
|
 |
Architectural series - AS: These beautiful,
handcrafted skate deterrents add an artistic flare to any application.
Parts can be used alone, or they can be interspersed as accent pieces with
the corresponding shape from the FA/FR series skate deterrents. |
|
Click on an image for specifics on
that design. |
|
Click here for pricing
information on aluminum pieces. Bronze pricing available by request.
|
|
|
|
|
Fixed Angle Pieces |
 |
Fixed Angle - FA135: This part is made specifically for chamfered
(beveled) edges, where the chamfer is 1” or more. |
|
Part measures 2" wide X 4 3/8" long (outside measurements).
|
|
Available in clear anodize (silver) aluminum.
Black, mocha, and white powder coat subject to availability. |
|
Click here for pricing
information.
|
 |
Fixed Angle - FA90A:
This patented part is
designed for 90 degree walls with 1/8" radius edge and is most commonly
used on granite, marble, stone, block, brick, or other surfaces with a
hard corner and no vertical clearance restrictions. |
| Part
measures
4.0" (top) x 2.375" (face) x 2.0" (wide) |
| Available
in clear anodize (silver) aluminum. Black, mocha
and white subject to availability. |
|
Click
here for pricing information.
|
 |
Fixed Angle - FA902.5:
This part is made specifically for ledges, walls, and planters with a
rounded 90-degree angle. |
| Part
measures 2" wide X 5" long (outside measurements).
|
| Available
in clear anodize (silver) and hard anodize
(dark gray) aluminum.
Mocha and white powder coat
subject to availability. |
|
Click
here for pricing information.
|
|
Fixed Radius Pieces |
 |
Radius - FR0.12: Designed
for walls with 1/8" radius edge (may be used in place of model FA90).
FR0.12 is most commonly used on granite, marble, stone, block, brick, or
other surfaces with a hard corner. May also be used on wood and plastic
boards (not exceeding 2" thick) or aluminum seating. |
|
Outside dimensions: 4.875" (top) x 1.0" (face) x 2.0" wide. |
| Available
in clear anodize (silver) and hard anodize
(dark gray) aluminum.
Mocha and white powder coat
subject to availability. |
|
Click
here for pricing information.
|
 |
Radius - FR0.5:
This part is designed for walls with 1/2" radius edge that do not form a
90 degree angle (may also be used in place of model FA902.5). Appropriate
for most pre-cast benches with 1/2" radius when specifying SMART PINS. |
|
Outside dimensions: 3.75" (top) x 1.0" (face) x 2.0" wide. |
| Available
in clear anodize (silver) and hard anodize
(dark gray) aluminum.
Mocha and white powder coat
subject to availability. |
|
Click
here for pricing information.
Click here to view a bench application. |
 |
Radius - FR1.0:
This part is designed to fit 1" radius edges; commonly used on poured
concrete with a 1" radius concrete and 2" bull nose brick. |
|
Outside dimensions: 4.375" (top) x 1.625" (face) x 2.0" wide. |
| Available
in clear anodize (silver) and hard anodize
(dark gray) aluminum.
Mocha and white powder coat
subject to availability. |
|
Click
here for pricing information.
|
 |
Radius - FR1.25:
This part is designed to fit 1-1/4" radius edges. Model FR1.25
is commonly used on 2-1/2" bull nose. |
|
Outside dimensions: 5.5" (top) x
1.625" (face) x 2.0" wide. |
| Available
in bronze
only. (See Architectural Series-Bullnose piece for aluminum product.) |
|
Click
here for pricing information.
|
 |
Radius - FR1.50:
This part is designed to fit
walls with a 1-1/2" radius edge. Model FR1.5 is commonly used on 3"
bull nose. |
|
Outside dimensions: 5.125"
(top) x 1.875" (face) x 2.0" (wide). |
| Available
in bronze
only. (See Architectural Series-Bullnose piece for aluminum product.) |
|
Click
here for pricing information.
|
 |
Bench Clip - FR0.25PC:
This part is designed to fit
plastic coated/expanded metal benches with a 1/4" radius edge. May be
used some model fiberglass benches. NOT RECOMMENDED FOR WOOD OR
PLASTIC BENCHES. |
|
Outside dimensions: 1.187"
(top) x 2.125" (face) x 1.5" (wide). |
| Available
in clear anodize (silver) aluminum. |
|
Click
here for pricing information.
|
 |
Bench Clip - FR0.12BC:
This part is designed specifically for fiberglass, aluminum, plastic
lumber or wood benches (slats must be at least 2" x 6" nominal). THIS PART
IS NOT TO BE USED ON CONCRETE, STONE, TILE, BRICK or other hardscape
substrates (use FR0.12). |
|
Outside dimensions: 4.75" (top) x 1.0" (face) x 1.0" (wide). |
| Available
in clear anodize (silver) aluminum. |
|
Click
here for pricing information.
|
 |
Curve Clip - FA90CC:
This part is designed specifically for curb applications or for walls with
a 1/2" radius edge. NOT FOR USE ON PRE-CAST CONCRETE. |
| Part
measures
4.0" (top) x 1.0" (face) x 2.0" wide. |
| Available
in clear anodize (silver) aluminum. |
|
Click
here for pricing information.
|
|
Flat Pieces |
 |
Flat Cap: These cast aluminum parts are designed to be
applied to flat surfaces. Attach them to the tops of walls and ledges
or place them in the approach path to stairs or ledges from which skaters
are leaping. Strategically installed in the path of skate traffic,
they effectively act as speed bumps. The oval shape
provides great flexibility in the layout of a specific pattern. |
| Part
measures
2.0" x 3.0" x 0.25".
Designed to be spaced with 4 pieces per linear foot. |
| Available
in clear anodize (silver/gray). |
|
Click
here for pricing information.
Click here to view an area in which flat
cap ovals have been installed. |
 |
Disc: The flat cap disc is designed for applications
where a larger piece is desired. |
|
Part
measures
6" diameter x 0.25". Designed to be spaced with
2 pieces per 1.25 linear feet. |
| Available
in clear anodize (silver/gray). |
|
Click
here for pricing information.
|
 |
Strap: Straps offer
convenience of greater coverage with less installation labor. |
| Part
measures
4.0" x 18.0" x .025".
Designed to be spaced with 1
piece per 1.5 linear feet. |
| Available
in clear anodize (silver/gray). |
|
Click
here for pricing information.
Click here to view an application of straps. |
|
Hand Rails |
 |
Hand Rail 1.5:
This part is made for tubular handrails (not appropriate for handicap
access handrails). |
| Part
measures 1.5" (outside measurements).
|
| Available
in clear anodize (silver/gray) aluminum.
Bronze and brass also available. |
|
Click
here for pricing information.
|
 |
Hand Rail 1.6:
This part is made for tubular handrails (not appropriate for handicap
access handrails). |
| Part
measures 2" wide X 3 3/8" long (outside measurements).
|
| Available
in clear anodize (silver/gray) aluminum.
Bronze and brass also available. |
|
Click
here for pricing information.
|
 |
 |
Hand Rail
1.9:
This part is made for tubular handrails (not appropriate for handicap
access handrails). |
| Part
size varies with design. |
| Available
in clear anodize (silver/gray) aluminum.
Bronze and brass also available. |
|
Click
here for pricing information.
|
|
Nylon Pieces |
 |
Nylon Curve
Cap:
This part is made for
poured cement walls; curbs; chamfered (beveled) edges; wood, fiberglass, metal and plastic benches;
and rectangular handrails
(not appropriate for stairs).
|
| Part measures 2" wide X 3" long.
|
|
Available in black, beige,
gray, white and yellow. |
|
Click
here for pricing information.
|
 |
Nylon Curve Strap (lip on both sides)/Universal Curve Strap
(as shown, lip on one side):
This part is made for tile, stone, stucco,
cinder block, brick, cement
benches, and new concrete (not appropriate for stairs). |
|
Part measures
2" wide X 5" long. |
|
Available in black, beige, gray
and white. |
|
Click
here for pricing information.
|
|
 |
Nylon Rail Wrap:
This part is made for tubular handrails
(not
appropriate for handicap access handrails).
|
|
| Part
measures 2" wide X 2 1/4" long.
|
|
| Available
in gray, white and black.
|
|
|
Click
here for pricing information.
|
|
SKATESTOPPERS®
are sold in kits.
Selecting the proper kit is easy. Simply measure the total linear footage
of the edges to be treated and determine the appropriate kit (see
Price List
for specific linear footages covered by each kit).
If the standard kit does not
fit your needs, ask about volume ordering. Product may be installed by
you or by our professional installation staff (in Southern California only).
Call for Standard Profile Product Sheet, with exact design dimensions for the
various products -- useful in determining the proper product to fit the shape of
the edge to which product is to be applied.
Click to view the
SKATESTOPPERS®
Price List
.
To order or to obtain additional information, please Contact Us .
Back to Top |
